Basic Kit

 

 

The LogKit Home: Components Diagram
(not contractual, for reference only)

 

 

 

 

LEGEND

 

	MATERIALS INCLUDED IN OUR KIT
	MATERIALS NOT INCLUDED IN OUT KIT

 

 

DOCUMENTS

 

	ARCHITECTURAL DRAWINGS
	BUILDING GUIDE

 

GROUND FLOOR MATERIALS

 

	FOUNDATION
	PARGING
	GROUND FLOOR JOISTS
	GROUND FLOOR SUB-FLOORING
	FLASHING
	STUDS SHORING
	NAILS AND METAL STRAPS
	TONGUE-AND-GROOVE SQUARED OFF PINE LOGS
	DOVETAILED CORNERS
	WEATHER-TIGHT PAPER
	FURRING
	WALL FRAMING
	FIBERGLASS INSULATION
	VAPOR BARRIER
	SHIPLAPPED INSIDE FACING
	SQUARED-OFF PINE COLUMNS
	COLUMN ANCHORING SYSTEM
	KEYS AND T-SHAPED MOULDINGS
	ROUGH FRAMES AND MOULDINGS
	EXTENSION HALF-COLUMNS
	LINTELS
	OPENINGS FLASHINGS

 

ROOFING MATERIALS

 

	EAVES DECORATIVE SUPPORTS (MOUNTAIN LODGE)
	TOP PLATE
	PREFABRICATED ROOF TRUSSES
	ROOF SHEATING
	ROOF COVERING
	DRIPS
	PREFABRICATED GABLE DORMERS
	GABLE WALLS DROP-SIDING
	BUILDING PAPER
	FIBERBOARD SHEATING
	FRIEZE
	FLY RAFTERS
	ROOF OVERHANGS SOFFIT'S
	BULL'S EYE
	ROOF VENTS

 

FIRST FLOOR MATERIALS (for TWO-STOREY MODELS)

 

	FIRST FLOOR GIRDER
	FIRST FLOOR JOISTS
	FIRST FLOOR SUB-FLOORING
	SOLE PLATE
	DWARF PARTITION
	GYPSUM BOARDS
	STAIRWAY AND HANDRAIL
	PENT ROOF

 

DOORS AND WINDOWS

 

	WINDOWS AND EXTERIOR DOORS
	INTERIOR DOORS

 

FINISHING MATERIALS

 

	BASEBOARDING
	MOULDINGS
	VINYL RUNNER OR TEXTURED PAINT
	EXTERIOR STAIN
	FLOOR COVERING
	PAINT AND WALL COVERING
	INTERIOR PARTITIONS
	CEILINGS AND FALSE BEAMS

 

UTILITIES

 

	KITCHEN CABINETS
	BATHROOM VANITY
	ELECTRICITY AND FIXTURES
	PLUMBING AND FIXTURES
	HEATING AND COOLING SYSTEM
	WELL AND SEPTIC TANK
	FIREPLACE

 

LIST OF MATERIALS SUPPLIED IN OUR BASIC KITS

• Squared-off treated pine logs 64 mm x 241 mm (3" x 10") planed and pre-soaked.
• Treated pine colums planed and pre-soaked (same thickness as logs).
• Keys 16 mm (1" x 3") System at the bottom of each column.
• Weather-tight gasket on subfloor (under the flashing)
• Metal flashing under the first row of logs.
• Galvanized corrugated iron strip under the first row of logs.
• Outside T-shaped moulding each side of columns.**
• 16 mm x 64 mm (lin x 3 in.) furring behind the log wall.
• Weather-tight paper behind the log wall and for upper walls.
• Wall framing 38 mm x 140 mm (2" x 6") studs for 600 mm (24") spacing behind the log wall.**
• Inside drop siding behind the log wall except on service room and bedroom walls (as indicated on price list).**
• 25 mm x 25 mm (1-1/8" x 1-1/18") inside moulding in corners where drop siding is required.**
• * Wood beams supporting the second floor with a maximum spacing of 1,2 m (4').
• 38 mm (2") tongued and grooved pine boards for the second floor.
• 38 mm x 140 mm (2" x 6") plate on the upper subfloor.**
• Prefab trusses for 600 mm (2') spacing. **
• 89 mm x 241 mm (4" x 10" ) eaves decorative supports (for Mountain Lodge Classic version only).
• * Upper wall framing, 38 mm x 140 mm (2" x 6" studs for 610 mm (2') spacing. **
• * Prefab dormers. ** (As per plan)
• Roof sheathing, 12,5 mm x 1220 mm x 2440 mm (1/2" x 4" x 8") standard type spruce plywood panels.
• 38 mm x 89 mm (2" x 4") lookout rafters, 610 mm (24") spacing for gable and overhang roof.**
• Facia board, 29 mm x 140 mm (1-1/4" x 6") pine board along the roof edge.**
• 16 mm (1") Tongue and groove pine boards for upper and dormer wall siding.**
• 16 mm x 64 mm (1" x 3") Furrings behind upper and dormer wall siding.
• 16 mm (1") Tongue and groove pine boards for roof overhang soffit.**
• Bulls-eye (decorative frame for ventilation).
• 3 coats of stain for outside part of logs, siding and frieze soffit.
• All nails and metal straps required for the log wall mounting.
• Shoring studs twenty 3,7 m x 38 mm x 89 mm (12' x 2" x 4") and six 3,7 m x 38 mm x 140 mm
• (12' x 2" x 6").**
• Plywood sheets 12,5 mm x 1220 mm x 2440 mm (1/2" x 4' x 8') for exterior upper walls.

.

* For 2 storey houses.
** Kiln dried wood.